MTU 20 V 4000 C22 Operations Instructions Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 139
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
Fault code Alarm text Meaning Task
065 L1 P-FUEL Fuel supply pressure too
low (1st limit)
1. Check fuel lines for leaks; repair
defective lines.
2. Clean fuel prefilter
3. Flush fuel prefilter
4. Replace filter element of fuel
prefilter.
5. Fuel filter replacement
(→ Page 86).
6. If fault is not rectified: Contact
Service.
066 L2 P-FUEL Fuel supply pressure too
low (2nd limit)
1. Check fuel lines for leaks; repair
defective lines.
2. Clean fuel prefilter
3. Flush fuel prefilter
4. Replace filter element of fuel
prefilter.
5. Fuel filter replacement
(→ Page 86).
6. If fault is not rectified: Contact
Service.
067 L1 T-COOLANT Coolant temperature too
high (1st limit). Warning
Reduce power.
068 L2 T-COOLANT Coolant temperature too
high (2nd limit).
Automatic engine shut‐
down.
1. Allow the engine to cool down.
2. Check coolant cooler (elements
etc.) and clean contaminated
parts (see manufacturer's docu‐
mentation).
3. Re-start the engine
(→ Page 35).
4. If fault occurs repeatedly: Con‐
tact Service.
081 RAIL LEAKAGE HP fuel system leaking,
system contains air
Contact Service.
082 RAIL PRESSURE
HIGH
Pressure in HP fuel system
exceeds specified value;
Solenoid valve of HP fuel
control block jamming or
wiring to solenoid valve de‐
fective
Contact Service.
083 RAIL PRESSURE
LOW
Pressure in HP fuel system
lower than the specified
value;
HP fuel control block de‐
fective or system leaking.
NOTE:
With very large generators
having a run-out time of
more than > 20 sec this
alarm is not a relevant
fault.
Contact Service.
087 L1 LEV. WATER IN
FUEL
Water level in fuel prefilter
too high
Check fuel prefilter
46 | Troubleshooting | M015675/05E 2011-10
TIM-ID: 0000003161 - 001
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 138 139

Comments to this Manuals

No comments