1.4 Crankshaft transport locking device – For transport with
flanged-on generator
Transport
This locking device protects the crankshaft bearings from shocks and vibration damage during unit
transport.
For removal of the transport locking device follow the following instructions:
• The transport locking device should remain installed as long as possible during unit installation in
order to avoid damage.
• Starting or barring the engine is allowed only with the transport locking device removed. Make sure
that the transport locking device of the generator is removed.
• Prior to every unit transport, this transport locking device must be reinstalled according to the in-
structions. The transport locking device of the generator is also to be fitted.
Removing the transport locking device from driving end (KS)
• Remove screw (4) on both sides. Remove retainer (2) and washer (3).
• Remove guard plate from flywheel housing.
Store the removed parts of the transport locking device carefully for possible reuse!
8 | Safety |
M015675/06E 2013-04
TIM-ID: 0000004012 - 001
Comments to this Manuals