MTU 20 V 4000 C22 Operations Instructions Page 61
- Page / 144
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
7.3.2 Crankcase breather – Cleaning
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Cleaner (Snow-White 11-0)
40460 1
Cleaner (Hakupur 312)
30390 1
WARNING
Compressed air gun ejects a jet of pressurized air.
Risk of injury to eyes and damage to hearing, risk of rupturing internal organs.
• Never direct air jet at people.
• Always wear safety goggles/face mask and ear defenders.
WARNING
Cleaner is extremely caustic.
Risk of injury and suffocation!
• Avoid contact with eyes and skin.
• Do not inhale vapors and smoke.
• Do not eat, drink, smoke when working with cleaner.
• Wear protective clothing, gloves, and goggles / safety mask.
• Take measures against electrostatic charging.
NOTICE
Cleaning agents should not be left to take effect for too long.
Damage to components is possible.
• Observe manufacturer's instructions.
Clean crankcase breather
Note: Protect rubber and synthetic components from oil and fuel, never treat with organic detergents. Wipe
with a dry cloth only.
1. Clean all metallic parts with cleaner (Snow-White 11-0), then rinse with cleaner (Hakupur 312).
2. Blow down all parts with compressed air.
M015675/06E 2013-04 | Task Description | 61
TIM-ID: 0000003510 - 006
- Operating Instructions 1
- Table of Contents 3
- 1 Safety 5
- Personnel requirements 6
- 1.3 Transport 7
- Transport 8
- TIM-ID: 0000004012 - 001 9
- Operation 10
- TIM-ID: 0000040535 - 001 11
- Welding work 12
- Working with batteries 12
- Fire prevention 14
- Used oil 14
- Safety notices 16
- 2 General Information 17
- 2.2 Engine layout 18
- TIM-ID: 0000002072 - 002 19
- Engine model designation 20
- TIM-ID: 0000012921 - 003 21
- COMBUSTION AIR / EXHAUST GAS 25
- COOLING SYSTEM (HT circuit) 25
- COOLING SYSTEM (LT circuit) 25
- LUBE OIL SYSTEM 25
- FUEL SYSTEM 26
- GENERAL OPERATING DATA 26
- CAPACITIES 26
- WEIGHTS / MAIN DIMENSIONS 26
- ACOUSTICS 27
- 3.2 Firing order 28
- 3.3 Main engine dimensions 29
- 4 Operation 30
- Preparation 32
- Start engine 32
- 4.4 Operational checks 33
- Stop engine 34
- 4.7 Cleaning the plant 36
- 5 Maintenance 37
- 6 Troubleshooting 38
- TIM-ID: 0000002541 - 002 39
- Component Cause Action 40
- 6.2 ECU 4 alarms 41
- TIM-ID: 0000003161 - 001 42
- 7 Task Description 52
- Barring engine manually (tool 53
- TIM-ID: 0000000950 - 003 54
- TIM-ID: 0000003285 - 003 57
- 7.3 Crankcase Breather 59
- Checking diaphragm 60
- Clean crankcase breather 61
- Clean filter element 62
- TIM-ID: 0000003532 - 003 64
- Installing grounding device 66
- Replace carbon brush 67
- 7.5 Valve Drive 68
- Checking valve-bridge balance 70
- TIM-ID: 0000004355 - 001 71
- Adjusting valve clearance 73
- Removing cylinder head cover 74
- 7.6 Injection Pump / HP Pump 75
- HP pump – Relief bore check 76
- 7.7.1 Injector – Replacement 77
- Remove injector 79
- Install injector 80
- TIM-ID: 0000000952 - 010 81
- 7.8 Fuel System 83
- 7.9 Fuel Filter 84
- 7.9.2 Draining fuel prefilter 85
- 7.10 Charge-Air Cooling 88
- 7.11 Air Filter 89
- Checking signal ring position 92
- 7.12 Starting Equipment 93
- TIM-ID: 0000006161 - 004 94
- 7.14 Oil Filtration / Cooling 96
- TIM-ID: 0000006401 - 006 97
- Removing strainer 99
- Checking strainer 100
- Cleaning strainer 100
- Installing strainer 100
- Preconditions 101
- TIM-ID: 0000000934 - 012 102
- Engine coolant change 104
- Engine coolant – Draining 105
- Preparatory steps 105
- Filling with coolant using a 107
- Final steps 107
- TIM-ID: 0000000961 - 010 108
- 7.16 Low-Temperature Circuit 111
- Charge-air coolant – Change 112
- Charge-air coolant – Draining 113
- Charge-air coolant pump – 116
- Checking pressure relief port 116
- Engine mounting – Check 117
- 7.18 Belt Drive 118
- 7.19.3 Generator – Cleaning 121
- Adjusting belt tension 122
- Checking drive belt tension 123
- – Drive belt replacement 124
- 7.20 Fan Drive 125
- Adjusting drive belt tension 126
- Replacing drive belt 127
- 7.21.1 Engine wiring – Check 128
- TIM-ID: 0000000948 - 011 129
- Checking engine control unit 130
- 8 Appendix A 131
- TIM-ID: 0000000858 - 011 132
- Local support 134
- 24h hotline 134
- Spare parts service 134
- 9 Appendix B 135
- DCL-ID: 0000014250 - 002 136
Related products and manuals for Engine MTU 20 V 4000 C22
Engine MTU 12 V 2000 M94 Operations Instructions
(141 pages)
(141 pages)
Engine MTU 16 V 2000 S96 Operations Instructions
(133 pages)
(133 pages)
Engine MTU 12 V 2000 M72 Operations Instructions
(147 pages)
(147 pages)
Engine MTU 20 V 4000 G23 Operations Instructions
(181 pages)
(181 pages)
Engine MTU C23R Operations Instructions
(163 pages)
(163 pages)
Engine MTU 8 V 2000 M40B Operations Instructions
(204 pages)
(204 pages)
Engine MTU 20 V 4000 C22 Operations Instructions
(139 pages)
(139 pages)
Engine MTU 12 V 2000 P12 User Manual
(190 pages)
(190 pages)
Engine MTU 12 V 4000 C10R User Manual
(124 pages)
(124 pages)
Engine MTU 12 V 2000 P12 Operations Instructions
(187 pages)
(187 pages)
Engine MTU 12 V 4000 C10R Service Manual
(104 pages)
Engine MTU 12V 2000 C66 Operations Instructions
(136 pages)
(136 pages)
Engine MTU 16 V 2000 P12 Specifications
(216 pages)
(216 pages)
Engine MTU Gas engine8 V 4000 L62 Specifications
(104 pages)
(104 pages)
Engine MTU 12 V 4000 C21 Service Manual
(214 pages)
(214 pages)
Engine MTU 20 V 4000 M93 Operations Instructions
(193 pages)
(193 pages)
Engine MTU Gas engine8 V 4000 L62 User Manual
(169 pages)
(169 pages)
Engine MTU C23 User Manual
(12 pages)
(12 pages)
Engine MTU 12 V 4000 L62 Operations Instructions
(187 pages)
(187 pages)
© 2020, manymanuals.com. All rights reserved. | 0.398 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals