MTU 12 V 2000 M72 Operations Instructions download pdf (Page 90)

Easy-change fuel filter replacement

with the engine stopped

1. Stop engine and disable engine start.

2. Cut out the filter to be replaced.

B Left filter cut out

C Right filter cut out

3. Remove cut-out easy-change filter using

the oil filter wrench.

4. Clean sealing surface on filter head.

5. Check sealing ring of the new easy-change

filter and coat it with fuel.

6. Fit SOLAS shield (→ Page 65).

7. Screw on easy-change filter and tighten by

hand.

8. Set three-way cock to operating position (A)

so that both filters are cut in (operating po‐

sition).

9. Replace further fuel filters in the same way.

10. Vent fuel system (→ Page 88).

Easy-change fuel filter replacement

with the engine running

1. Cut out the filter to be replaced.

2. Open the threaded vent plugs at the filter

head of the cut-out filter and make sure that

the fuel filter is not pressurized.

Note: New version has two threaded vent plugs,

old version has four threaded vent plugs.

3. Close threaded vent plugs.

4. Remove cut-out easy-change filter using

the oil filter wrench.

5. Clean sealing surface on filter head.

6. Check sealing ring of the new easy-change

filter and coat it with fuel.

7. Fit SOLAS shield (→ Page 65).

8. Screw on easy-change filter and tighten by

hand.

9. Set three-way cock to operating position

(both filters cut in).

10. Replace further fuel filters in the same way.

90 | Task Description | M015650/04E 2012-02

TIM-ID: 0000004914 - 004

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 146 147

Comments to this Manuals

No comments