MTU 12 V 2000 M72 Operations Instructions download pdf (Page 102)

7.13 Lube Oil System, Lube Oil Circuit

7.13.1 Engine oil – Level check

Preconditions

☑ Engine is stopped and starting disabled.

Oil level check prior to engine start

1. Withdraw oil dipstick from guide tube and

wipe it.

2. Insert oil dipstick into guide tube up to the

stop, withdraw after approx. 10 seconds

and check oil level.

3. Oil level must be between "min." and "max."

marks.

4. Top up to "max." if required (→ Page 103).

5. Insert oil dipstick into guide tube up to the

stop.

Oil level check after the engine is stopped

1. 5 minutes after stopping the engine, remove oil dipstick from the guide tube and wipe it.

2. Insert oil dipstick into guide tube up to the stop, withdraw after approx. 10 seconds and check oil level.

3. Oil level must be between “min.” and "max." marks.

4. Top up to "max." if required (→ Page 103).

5. Insert oil dipstick into guide tube up to the stop.

102 | Task Description | M015650/04E 2012-02

TIM-ID: 0000000032 - 002

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 146 147

No comments

MTU 12 V 2000 M72 Operations Instructions Page 102