MTU 12 V 2000 M72 Operations Instructions Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
7.4 Crankcase Breather
7.4.1 Crankcase breather – Cleaning oil pre-separator element
Preconditions
Engine is stopped and starting disabled.
WARNING
Fuels are combustible.
Risk of fire and explosion!
Avoid open flames, electrical sparks and ignition sources.
Do not smoke.
WARNING
Compressed air
Risk of injury!
Do not direct compressed-air jet at persons.
Wear protective goggles / safety mask and ear protectors.
Crankcase breather – Cleaning oil
pre-separator element
1. Remove cover (5) from housing (4).
2. Take off oil pre-separator element (1), gas‐
ket (3) and O-ring (2).
3. Wash oil pre-separator element (1) and
housing (4) in fuel and blow out with com‐
pressed air.
4. Moisten oil pre-separator element (1) with
engine oil.
5. Position oil pre-separator element (1) with
new gasket (3) and O-ring (2) on housing
(4) and install cover (5).
6. Clean further oil pre-separator elements in
the same way.
78 | Task Description | M015650/04E 2012-02
TIM-ID: 0000011545 - 004
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 146 147

Comments to this Manuals

No comments